Configuring D-Link DSL 2730U for BSNL Broadband

Note: If you are seeing difference in the interface and the screenshots in this post, then you might be using the newer version of this modem See here: How to Configure D-Link DSL 2730U modem (New Version)
This guide shows step by step guide to configure your D-Link DSL-2730U for BSNL Broadband. This include the normal setting which can also be applied to the other routers. Just follow the few steps to configure your modem

DSL D-Link Modem Rtouter

Step 1: Open in your web browser and login using your username password or by default it is admin(username) and admin(password)


Step 2: Click on Advanced Setup > Layer2Interaface> ATM Interface> Click Add

Gateway 1

Step 3 : Put the following values(As shown in the below image). and click Apply/Save

Gateway 2

Step 4: Now click on WAN Service and click add

Gateway 3

Step 5 :Select the Layer2 Interface which you have created in the previous step, Click Next

Gateway 4

Step 5: Ensure the following Settings

Gateway 5

Step 6:  Write Your Username and password. In the PPPoE Service Name box put the value “dataone“, Click Next

Gateway 6

Step 7 : Select the gateway ppp0, Click Next

Gateway 7

Step 7: Now in the DNS Server Configuration page move ppp0 interface to the “Selected DNS sever Interfaces”, Click Next

Gateway 8

Step 8 : Click Apply/Save

Gateway 9

Now reboot your modem.
Your modem is now configured to be connected to Internet. If you want add a manual DNS server you can enter it into the DNS Configuration Page

Related posts

How to connect two routers with one BSNL Broadband Connection
Decreasing WiFi Signal in D-Link DSL 2730U
Adding DNS Server in D-Link DSL 2730U
Selecting The Best DNS Server to Get Maximum Bandwidth From your ISP


Microsoft’s New Messaging App for Android
Resumable Downloads from Google Drive
Know Which Website Has Access to Your Device Hardware
Save Any Image or File from a Website to Your Google Drive Account